View FDN339AN_429687.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FDN339AN
November 1999
FDN339AN
N-Channel 2.5V Specified PowerTrench MOSFET
General Description
This N-Channel 2.5V specified MOSFET is produced using Fairchild Semiconductor's advanced PowerTrench process that has been especially tailored to minimize the on-state resistance and yet maintain low gate charge for superior switching performance.
Features *
3 A, 20 V. RDS(ON) = 0.035 @ VGS = 4.5 V RDS(ON) = 0.050 @ VGS = 2.5 V.
* * *
Low gate charge (7nC typical). High performance trench technology for extremely low RDS(ON). High power and current handling capability.
Applications * DC/DC converter * Load switch
D
D
S
SuperSOT -3
TM
G
TA = 25C unless otherwise noted
G
S
Absolute Maximum Ratings
Symbol
VDSS VGSS ID PD TJ, T stg Drain-Source Voltage Gate-Source Voltage Drain Current - Continuous - Pulsed
Parameter
Ratings
20 8
(Note 1a)
Units
V V A W C
3 20 0.5 0.46 -55 to +150
Power Dissipation for Single Operation
(Note 1a) (Note 1b)
Operating and Storage Junction Temperature Range
Thermal Characteristics
RJA RJC Thermal Resistance, Junction-to-Ambient Thermal Resistance, Junction-to-Case
(Note 1a) (Note 1)
250 75
C/W C/W
Package Outlines and Ordering Information
Device Marking
339
Device
FDN339AN
Reel Size
7''
Tape Width
8mm
Quantity
3000 units
1999 Fairchild Semiconductor Corporation
FDN339AN Rev. C
FDN339AN
Electrical Characteristics
Symbol
BVDSS BVDSS TJ IDSS IGSSF IGSSR
TA = 25C unless otherwise noted
Parameter
Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Zero Gate Voltage Drain Current Gate-Body Leakage Current, Forward Gate-Body Leakage Current, Reverse
(Note 2)
Test Conditions
VGS = 0 V, ID = 250 A ID = 250 A,Referenced to 25C VDS = 16 V, VGS = 0 V VGS = 8 V, VDS = 0 V VGS = -8 V, VDS = 0 V
Min
20
Typ
Max
Units
V
Off Characteristics
14 1 100 -100 mV/C A nA nA
On Characteristics
VGS(th) VGS(th) TJ RDS(on)
Gate Threshold Voltage Gate Threshold Voltage Temperature Coefficient Static Drain-Source On-Resistance On-State Drain Current Forward Transconductance
VDS = VGS, ID = 250 A ID = 250 A,Referenced to 25C VGS = 4.5 V, ID = 3 A VGS = 4.5 V, ID = 3 A, TJ=125C VGS = 2.5 V, ID = 2.4 A VGS = 4.5 V, VDS = 5 V VDS = 5 V, ID = 3 A
0.4
0.85 -3 0.029 0.040 0.039
1.5
V mV/C
0.035 0.061 0.050
ID(on) gFS
10 11
A S
Dynamic Characteristics
Ciss Coss Crss Input Capacitance Output Capacitance Reverse Transfer Capacitance
(Note 2)
VDS = 10 V, VGS = 0 V, f = 1.0 MHz
700 175 85
pF pF pF
Switching Characteristics
td(on) tr td(off) tf Qg Qgs Qgd Turn-On Delay Time Turn-On Rise Time Turn-Off Delay Time Turn-Off Fall Time Total Gate Charge Gate-Source Charge Gate-Drain Charge
VDD = 10 V, ID = 1 A, VGS = 4.5 V, RGEN = 6
8 10 18 5
16 18 29 10 10
ns ns ns ns nC nC nC
VDS = 10 V, ID = 3 A, VGS = 4.5 V
7 1.2 1.9
Drain-Source Diode Characteristics and Maximum Ratings
IS VSD Maximum Continuous Drain-Source Diode Forward Current Drain-Source Diode Forward Voltage VGS = 0 V, IS = 0.42 A
(Note
0.42 0.65 1.2
A V
2) Notes: 1: RJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the drain pins. RJC is guaranteed by design while RCA is determined by the user's board design. a) 250C/W when mounted on a 0.02 in2 Pad of 2 oz. Cu. Scale 1 : 1 on letter size paper 2: Pulse Test: Pulse Width 300 s, Duty Cycle 2.0% b) 270C/W on a minimum mounting pad of 2 oz. Cu.
FDN339AN Rev. C
FDN339AN
Typical Characteristics
20 VGS = 4.5V ID, DRAIN CURRENT (A) 16 3.0V 2.5V
RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE 2 1.8 1.6 1.4 1.2 1 0.8 2.5V 3.0V 3.5V 4.0V VGS = 2.0V
12
2.0V
8
4 1.5V 0 0 0.5 1 1.5 2 2.5 3 VDS, DRAIN TO SOURCE VOLTAGE (V)
4.5V
0
4
8
12
16
20
ID, DRAIN CURRENT (A)
Figure 1. On-Region Characteristics.
Figure 2. On-Resistance Variation with Drain Current and Gate Voltage.
0.1 RDS(ON), ON-RESISTANCE (OHM)
1.6 RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE ID = 3A VGS = 4.5V 1.4
ID = 1.5A 0.08
1.2
0.06 TA = 125oC TA = 25oC 0.02
1
0.04
0.8
0.6 -50 -25 0 25 50 75 100 125 150
0 1 2 3 4 5 VGS, GATE TO SOURCE VOLTAGE (V)
TJ, JUNCTION TEMPERATURE (oC)
Figure 3. On-Resistance Variation with Temperature.
20 125 C
o
Figure 4. On-Resistance Variation with Gate-to-Source Voltage.
100 IS, REVERSE DRAIN CURRENT (A)
VDS = 5V ID, DRAIN CURRENT (A) 16
TA = -55 C
o
25oC
VGS = 0V 10 1 0.1 0.01 0.001 0.0001
12
TA = 125oC 25 C -55 C
o o
8
4
0 0.5 1 1.5 2 2.5 3 VGS, GATE TO SOURCE VOLTAGE (V)
0
0.2
0.4
0.6
0.8
1
1.2
VSD, BODY DIODE FORWARD VOLTAGE (V)
Figure 5. Transfer Characteristics.
Figure 6. Body Diode Forward Voltage Variation with Source Current and Temperature.
FDN339AN Rev. C
FDN339AN
Typical Characteristics
5 VGS, GATE-SOURCE VOLTAGE (V) ID = 3A 4 VDS = 5V
(continued)
1000 10V 800 CAPACITANCE (pF) 15V CISS 600 f = 1MHz VGS = 0 V
3
2
400
1
200
COSS CRSS
0 0 2 4 6 8 10 Qg, GATE CHARGE (nC)
0 0 4 8 12 16 20 VDS, DRAIN TO SOURCE VOLTAGE (V)
Figure 7. Gate Charge Characteristics.
Figure 8. Capacitance Characteristics.
100 RDS(ON) LIMIT ID, DRAIN CURRENT (A) 10 POWER (W) 10ms 100ms 1 10s VGS = 4.5V SINGLE PULSE o RJA = 270 C/W TA = 25 C 0.01 0.1 1 10 100 VDS, DRAIN-SOURCE VOLTAGE (V)
o
20 SINGLE PULSE 1ms 16 RJA=270 C/W TA=25 C 12
o o
1s DC
8
0.1
4
0 0.0001 0.001 0.01 0.1 1 10 100 1000
SINGLE PULSE TIME (SEC)
Figure 9. Maximum Safe Operating Area.
Figure 10. Single Pulse Maximum Power Dissipation.
1 TRANSIENT THERMAL RESISTANCE 0.5 0.2 0.1 0.05 0.02 0.01 0.005 0.002 0.001 0.0001 0.001 0.01 0.1 t1 , TIME (sec) 1 10
D = 0.5 0.2 0.1 0.05 0.02 0.01 Single Pulse P(pk) r(t), NORMALIZED EFFECTIVE
R JA (t) = r(t) * RJA R JA = 270 C/W
t1
t2
TJ - TA = P * RJA (t) Duty Cycle, D = t1 /t2
100 300
Figure 11. Transient Thermal Response Curve.
Thermal characterization performed using the conditions described in Note 1b. Transient themal response will change depending on the circuit board design.
FDN339AN Rev. C
SuperSOTTM-3 Tape and Reel Data and Package Dimensions
SSOT-3 Packaging Configuration: Figure 1.0
Customize Label
Packaging Description:
SSOT-3 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 3,000 units per 7" or 177cm diameter reel. The reels are dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 10,000 units per 13" or 330cm diameter reel. This and some other options are described in the Packaging Information table. These full reels are individually labeled and placed inside a standard intermediate made of recyclable corrugated brown paper with a Fairchild logo printing. One pizza box contains eight reels maximum. And these intermediate boxes are placed inside a labeled shipping box which comes in different sizes depending on the number of parts shipped.
Antistatic Cover Tape
Human Readable Embossed Label Carrier Tape
3P
SSOT-3 Std Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Reel Size Box Dimension (mm) Max qty per Box Weight per unit (gm) Weight per Reel (kg) Note/Comments Standard (no flow code) TNR 3,000 7" Dia D87Z TNR 10,000 13"
3P
3P
3P
SSOT-3 Std Unit Orientation
343mm x 342mm x 64mm Intermediate box for D87Z Option Human Readable Label
187x107x183 343x343x64 24,000 0.0097 0.1230 30,000 0.0097 0.4150
Human Readable Label sample
Human Readable Label
SSOT-3 Tape Leader and Trailer Configuration: Figure 2.0
187mm x 107mm x 183mm Intermediate Box for Standard Option
Carrier Tape Cover Tape
Components Trailer Tape 300mm minimum or 75 empty pockets Leader Tape 500mm minimum or 125 empty pockets
August 1999, Rev. C
SuperSOTTM-3 Tape and Reel Data and Package Dimensions, continued
SSOT-3 Embossed Carrier Tape Configuration: Figure 3.0
P0 T E1 P2 D0 D1
F E2 B0 Wc
W
Tc K0
P1
A0
User Direction of Feed
Dimensions are in millimeter Pkg type SSOT-3 (8mm)
A0
3.15 +/-0.10
B0
2.77 +/-0.10
W
8.0 +/-0.3
D0
1.55 +/-0.05
D1
1.125 +/-0.125
E1
1.75 +/-0.10
E2
6.25 min
F
3.50 +/-0.05
P1
4.0 +/-0.1
P0
4.0 +/-0.1
K0
1.30 +/-0.10
T
0.228 +/-0.013
Wc
5.2 +/-0.3
Tc
0.06 +/-02
Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C).
20 deg maximum Typical component cavity center line
0.5mm maximum
B0 20 deg maximum component rotation
0.5mm maximum
Sketch A (Side or Front Sectional View)
Component Rotation
A0 Sketch B (Top View)
Typical component center line
Sketch C (Top View)
Component lateral movement
SSOT-3 Reel Configuration: Figure 4.0
Component Rotation
W1 Measured at Hub
Dim A Max
Dim A max
Dim N
See detail AA
7" Diameter Option
B Min Dim C See detail AA W3
Dim D min
13" Diameter Option
W2 max Measured at Hub DETAIL AA
Dimensions are in inches and millimeters
Tape Size
8mm
Reel Option
7" Dia
Dim A
7.00 177.8 13.00 330
Dim B
0.059 1.5 0.059 1.5
Dim C
512 +0.020/-0.008 13 +0.5/-0.2 512 +0.020/-0.008 13 +0.5/-0.2
Dim D
0.795 20.2 0.795 20.2
Dim N
2.165 55 4.00 100
Dim W1
0.331 +0.059/-0.000 8.4 +1.5/0 0.331 +0.059/-0.000 8.4 +1.5/0
Dim W2
0.567 14.4 0.567 14.4
Dim W3 (LSL-USL)
0.311 - 0.429 7.9 - 10.9 0.311 - 0.429 7.9 - 10.9
8mm
13" Dia
July 1999, Rev. C
SuperSOTTM-3 Tape and Reel Data and Package Dimensions, continued
SuperSOTTM-3 (FS PKG Code 32)
1:1
Scale 1:1 on letter size paper
Di mensions shown below are in: inches [mil limeters]
Part Weight per unit (gram): 0.0097
September 1998, Rev. A
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
ACExTM BottomlessTM CoolFETTM CROSSVOLTTM E2CMOSTM FACTTM FACT Quiet SeriesTM FAST FASTrTM GTOTM
DISCLAIMER
HiSeCTM ISOPLANARTM MICROWIRETM POPTM PowerTrench QFETTM QSTM Quiet SeriesTM SuperSOTTM-3 SuperSOTTM-6
SuperSOTTM-8 SyncFETTM TinyLogicTM UHCTM VCXTM
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Rev. E

▲Up To Search▲

Price & Availability of FDN339AN

	To Download FDN339AN Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .